how to seal outdoor tiles in 10 simple steps!
One thing is to seal the tiles.
Sealing outdoor tiles over time not only helps prevent staining and cracking, but also helps prevent other types of outdoor damage.
Now that you know why you\'re doing this, the question you might ask is, \"How did you do it ? \"?
\"Step 1: collect your supplies.
The first thing you need to do is go to the hardware store to buy your supplies.
You need: sponge, paint brush, broom, spatula, mud float and tile and mud sealer.
Step 2: Clean the tiles.
Clean the tiles and make sure they are completely free of dust, dirt and debris.
It\'s easy, but it\'s important.
If you don\'t do a thorough job or completely forget about this step, dust and debris will be stuck under the seal material layer as long as the sealing material persists.
Step 3: seal the tiles.
This is a two-part process.
Apply the sealant to the tile as evenly as possible using a paint brush and let the tile dry.
However, you have to be careful not to let the sealant drop from the main body of the tile and drip into the space between the tiles as this is where the grout is.
This is important because the mud does not adhere well to the sealing material.
Step 4: let it dry.
Once you \'ve finished this app, let the sealing material dry overnight.
This drying is necessary as it will ensure that you already have a sealed coating when you apply the grout, and when the tile touches the grout it protects the tile from discoloration.
Step 5: apply mud.
Once the first layer of sealing material is dry, it is time to apply the grouting material.
Apply mud between tiles using a tro knife.
Then, float your mud on the mud, smooth. About 15-
20 minutes after completion, wipe the grouting with a wet sponge.
Let it sit for another 2 hours, then wipe all the excess grout with a clean damp cloth.
Your mud should be in 2-
3 days, so wait so long before you get to the next step.
Step 6: sweep.
You are not finished yet, and next you will sweep the tiles to remove any dust or debris accumulated during the drying of the grout.
Step 7: Apply glue.
Apply the caulking agent evenly to the tiles and mud.
Let this night dry.
Step 8: sweep again.
Sweep again to remove any dust or debris accumulated when the tiles are dry.
Step 9: apply the last layer of sealant.
This last floor will further protect your tiles.
The extra protection is worth it.
Step 10: appreciate your work!
You\'re finally done, and it\'s time to look down and appreciate your work.
This is by far the most enjoyable step for most people.
Although it may take a few days, sealing the tiles is not only easy, but also a job that can be done by all DIY homeowners.
This is also a project that allows you to enjoy new waterproof and dirty outdoor tiles in the coming years!