Sine 2012, We have been specialized in only Marble

How to Fix Porcelain Tile

by:Afaithstone     2020-10-13
Tiles are considered more durable than tiles and are ideal for floors and walls.But even the most durable tiles are vulnerable to damage.In some cases, you can fix the chip on the tile using a porcelain repair kit.Cracked tiles should be replaced to prevent tripping or to prevent water from damaging the mortar bed.Get the same size of the damaged tile and get some supplies to fix the tile.Apply masking tape on the outer edge of the tile, and the edges align the outer edge of the tape instead of covering the grouting joint.Apply additional strips to completely cover the surface of the tile.Wear safety glasses and work gloves.Break the tiles with a cold chisel and hammer.To do this, start in the middle of the tile, hit the outer end of the chisel with a short stroke with a hammer, and score the edges with the lines in the tape.Continue to break the tiles into pieces according to the score line.Remove the masking tape and the attached tile and discard it.Use the chisel and hammer to remove any small tiles left on the mortar bed.Remove any mud left on the edge of the surrounding tile, be careful not to cut the edge of the surrounding tile.Remove the 1/8 chip of the exposed mortar bed where the tiles are removed.Clean up sundries and dust with vacuum and vacuum hoses.Mix a batch of thin mortar in a plastic bucket using a plastic putty knife.To do this, add a small amount of water to the bucket, and add flakes to the small bracket, stirring as you walk.Add mortar until the batch reaches medium consistency, similar to mashed potatoes.Moisten the broken mortar bed installed with a damp sponge with new tiles.To do this, move the sponge back and forth above the mortar and unscrew the water.Apply 1/4 evenly with putty knife-inch-Thin thick layers-Put on the back of the new tile.Place the tile face up and align the space of the outer edge evenly on the edge of the surrounding tile.If necessary, press the edge of the new tile so that the surface is consistent with the surface of the surrounding tile.Use a damp sponge to remove any thin settings that ooze at intervals between tiles.Discard any remaining thin sleeves and thoroughly clean the barrels and sponges with water.Let thinset heal after two hours.Use a damp sponge to remove any dry flakes from the tiles and surrounding tiles.Mix a batch of tile grout in the barrel to medium consistency.Using putty knife, fill the space between the new tile and the surrounding tile with grouting.Unscrew the sponge and gently wipe the grouting joint to make it look even.Clean the sponge thoroughly and let the mud dry for two hours.Remove any dry grout on the tile with a damp sponge.Dry the tiles with a clean rag.
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear there ,thank you for your kind message .We'd check and come back to you as soon as possible .Should you need any more assistance ,please add our wechat account for more timely response. Wechat:jane5125