Sine 2012, We have been specialized in only Marble

home decorating ideas how to mosaic tile a table

by:Afaithstone     2020-10-11
Many homeowners want to change the decor of their homes and add life to their desktops.
Replacing existing wooden desktops with mosaic masterpieces is a great way to rescue other stable and sturdy furniture.
With the passage of time and use, the desktop will suffer a lot of unexpected abuse.
Objects that slide through the table can be completed in March;
Accidental impact can cause debris and dents.
Fixing scratches, gouging, and scratches can restore the finish, but after fixing these issues a few times, the table obviously gets better.
Bringing a new life to the table with mosaic art, saving the cost of buying a new table, is a great way to add a sense of individuality to any room.
If you find a table with beautiful lines and perfect overall shape, but the finish is in poor condition, don\'t miss out on yard sales or flea market deals just for this reason.
Or, better yet, if Aunt Josephine or Grandma opens the attic for you, have fun shopping for free and take advantage of the opportunity to save a table.
Who knows your cunning, artistic efforts may become the next biography of heir.
Adding mosaics to your desktop doesn\'t require much tiling skill or artistic talent, just a good idea of what you like.
This is the table you designed.
Consider turning the table into a fun family project.
Get the child\'s opinion and give them the experience of recycling an item destined to be discarded.
Before you start measuring the length and width of the desktop with a tape measure, avoid the mosaic stuff.
Write down the size and go to the store to buy the mold.
Choose a flat shape that is at least inches wide and enough to run your feet to fit the size of your desktop.
The model will serve as a frame for the mosaic, so you can choose to decorate the model or the normal model.
Place the mold on the edge of the table and mark where it needs to be cut.
Place the mold in the Mitter box, cut the end of the mold with a hand saw with a 45 degree angle, so that when you cut the end of the mold, it fits together like a photo frame
Cutting edges formed with 220-sanding
Remove sandpaper from the rough edges.
Put a large piece of cardboard on the whole desktop.
Dry the mold along the edge of the table.
Track the size of the desktop from the molded inner edge to form a template for the available space.
When finished, your mosaic will be placed inside the molding frame.
If you are going to paint the mold, apply the mold with the right primer.
Apply a wood stain, polyurethane or enamel paint of your chosen color to the styling.
Let the mold dry for three to four hours.
Paint on the second floor of the coating of your choice and leave it on one side to dry.
Table top for preparing mosaic tiles 220-
Sandpaper and sand after completion.
Don\'t worry about removing stains, just remove the existing finish or paint layer.
If you add mosaic tiles to a small table, put 220-
Polish sandpaper around the grinding block and polish the table by hand.
Dry the molding again and install it in a position to be placed later.
Make sure that polyurethane, paint or stains are dry before handling.
Track the inside of the frame directly to the desktop with a permanent mark.
Remove the mold.
Your mosaic tiles will be laid inside the bar.
Choose a mosaic pattern that you are art and sketch the freehand pattern you want to see on the table on the Kraft paper pattern board.
If you have a picture you like, find a picture online, zoom in on it, and trace it to the template.
You may want to put a large combination of letters on the table.
If so, sketch the letters or track them from the template.
Think about it, put your child\'s hand on a kraft paper die board and have a mosaic that is truly private to your family.
You may even want the hue of a specific color with an abstract design or shadow.
Prepare mosaic tiles to wrap a full size tile with a towel.
Wear safety glasses and work gloves.
Hit the towel with a hammer and break it into a smaller part.
You can recycle tiles from renovations, buy odd colors, or buy tiles that are specially designed for mosaics.
Set the mosaic on the template, place the broken tile or small mosaic tile fragment on the template, leave it inside the Sketch line, and then fill in the background color.
Cutting tiles with porcelain tile tongs is not suitable for what you want.
Trim the small openings on the tiles until they fit the space you want.
The tiles can be closely connected, or you can leave a distance of up to inches between the two, which will be filled with grout later.
Add the mosaic tile to the table top, dip the notch spatula into the thin tile adhesive, and pour it around to trofull.
Apply a thin and uniform adhesive to the top of the table and keep it inside the drawing line.
If you are adding a mosaic to a large area, apply the adhesive to an area of 18 by 18 inch at a time.
Turn the spatula on its side and gently dig the gap into the adhesive.
While making the wave line, the gap is passed through the thin sleeve.
Select a tile from the corresponding corner of the template.
Scoop the adhesive onto the stick and lay a thin layer on the back of a tile.
Place the mosaic tiles in the thin sleeve at the top of the table and press in place.
Continue to move the tiles from the template to the desktop, follow the same pattern one by one at the time of the transfer, then set the tiles on the surface of the table until all the tiles in the template are placed on the desktop.
The frame mosaic squeezes a long, continuous wood glue line along the back of the molded.
Set the molding next to the mosaic.
Repeat the process for the remaining three molding pieces.
Put the weight on the mold or fix them on the desktop with C-clamps.
Allow wood glue and tile adhesive to dry for 48 to 72 hours.
Mixing unpolished grout with water or using pre-grouting mosaicmixed grout.
Scoop the grout onto the rubber grout.
If you add a mosaic design to a small table, you can use a rubber spatula.
Apply grouting on mosaic tiles while pressing grouting between tiles.
Wet a natural sponge with water.
Erase excess mud from the surface of the mosaic tile.
Let the mud solidify for 72 hours.
Apply a layer of grouting sealing agent to the grouting.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear there ,thank you for your kind message .We'd check and come back to you as soon as possible .Should you need any more assistance ,please add our wechat account for more timely response. Wechat:jane5125