cleaning tips -
If your floor is not made of natural tiles, then using white vinegar is one of the best ways to remove mud dirt.You have to mix part of white vinegar with part of water.Put this mixed solution into the spray bottle and apply it to the loose ash.
Leave for a few minutes and then start rubbing with the help of the cleaning brush.Once you feel the mud is clean, you can cover the floor neatly with fresh water to clean the solution.2.It is not recommended to clean tiles made of natural stone such as marble or limestone with vinegar.
In this case, you can mix baking soda with water.You need to mix 3 portions of baking soda with a portion of the water.Then apply this mixture on loose ash with a small brush.
Clean it by scrubbing it on the tile.
Then you can clean it up with fresh water.3.You can also clean the tiles and loose ash using oxygen-added bleaching powder.Mix two tablespoons of oxygen bleach with two cups of warm water.
Dissolve properly until the oxygen bleach is fully activated.This method works very well, but you need to apply a little mixture on one corner of the tile to check.Sometimes, oxidized bleach color the tiles.
Later, start cleaning the floor by applying the mixture, and then clean the floor thoroughly with water.You should clean the loose ash properly with a nylon brush;In order to remove the dirt, you must rub the grouse correctly.Dip the brush directly into the solution for the best results and start cleaning.
With the help of hydrogen peroxide, baking soda and any dishwashing soap, you can effectively clean the pine cream.Mix three parts of baking soda, one part of hydrogen peroxide and one spoon of baking powder.There are three kinds of cleaning agents for this mixture, so it helps to clean the loose pulp effectively.
Apply the paste and let it dry for 15 minutes before starting to scrub the floor.Finally wash it with clear water.The best way how to clean the tile grouting, if there is no effect, it is best to hire a professional tile and grouting cleaning expert